Metal Detecting and Relic Hunting in Australia
September 08, 2010, 15:43 *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Congratulations to both Sskim and Irish9 - joint winners in August's Coin Of The Month!
 
  Home   Forum   Help Search Gallery Login Register Chat  
Pages: [1]
  Print  
Author Topic: Water Tectin  (Read 212 times)
Clarrie
Bronze Member
**
Offline Offline

Location: Geelong Vic
Detector Used:
GPX4500/Etrack
Oldest find:
approx 400 yo Chinese coin
Posts: 20


  • Awards Awarded for finding a Penny

  • Awards
    « on: February 09, 2010, 17:47 »

    Gday all
    I went for a look down the local beach last night,, Lovely night, calm and warm.. and i thought bugger it,i might have a look in the water. Now i have never tried this before but i have read on here about it.. The tide was coming in so i wasnt in for long ,but there was loads of targets.
    I only chose to dig a couple, 1 was 1$ coin badly corroded and other was a sinker.. One i left in water because i couldnt get the dam thing in the scoop Undecided.

    Which brings me to ask,, Is there any tips,tricks to use once you have pinpointed,I placed my foot behind coil once i had it pinpointed and then scooped in front of my foot. Then moved scoop and went over my hole to see if it was still there.

    Also do you use one of those floating tubs etc to empty scoop in once you have target. ?

    Took home the Trac and gave it a good wash, and i am thinking of using  armoural on the shafts for some protection. I also use some putty at work we lovingly call (dogshit) which is a moisture and electrical sealer that wont dry out and can easily be removed on the bottom shaft where coil wire enters to help stop water travelling up centre of tube.
    Ok those who know me would say this is a marathon post for me so i will shutup for now  Smiley

    Thanks for listening Tongue
    Logged
    Killer
    Bronze Member
    **
    Offline Offline

    Location: Sth Aust
    Detector Used:
    GP3000/Ace250
    Posts: 16


    Awards
    « Reply #1 on: February 09, 2010, 17:54 »

    Gee Clarrie, that was longer than some of your missus essays, come back to S.A. that Victorian waters getting to you. Killer
    Logged
    lazyaussie
    Platinum Member
    *****
    Offline Offline

    Location: Melbourne Vic
    Detector Used:
    excal 1000 explorer ll ace 250
    Oldest find:
    1798 silver spoon
    Posts: 640


  • Awards Award for finding a Florin Award for finding a sixpence Awarded for finding an in tact bullet Awarded for finding a Penny

  • Awards
    « Reply #2 on: February 09, 2010, 18:43 »

    hi there i usually get right in the water with a mask & snorkel & fan the targets out, the other way i do it is when i find a targets i fan some of the sand away with my foot then pinpoint when I'm pinpointed with the coil dead center i put the scoop behind the coil move the coil then scoop, it can be quite noisy way to do it but it works. so0me times with the foot behind the coil way you'll miss the target due to having the scoop on the wrong angle.
    lazyaussie
    Logged

    show me the gold arrrr
    Bolt
    Bronze Member
    **
    Offline Offline

    Location: lakes entrance
    Detector Used:
    Minelab e-trak GP 3500
    Oldest find:
    1850s odd shilling
    Posts: 117

  • Awards Award for finding a Florin Award for finding a threepence Award for finding a sixpence Award for finding a Half Penny Awarded for finding a Penny Awarded for finding an in tact bullet

  • Awards
    « Reply #3 on: February 10, 2010, 19:53 »

    Get yourself some hooka gear and a boat  Grin

    Kind regards Ray
    Logged
    Clarrie
    Bronze Member
    **
    Offline Offline

    Location: Geelong Vic
    Detector Used:
    GPX4500/Etrack
    Oldest find:
    approx 400 yo Chinese coin
    Posts: 20


  • Awards Awarded for finding a Penny

  • Awards
    « Reply #4 on: February 11, 2010, 10:18 »

    Thanks Lazy i am doin it that way ,, finding plenty of sinkers etc,, few goldies..

    I am using silicone spray on the tector ,, seems to give it good protection,, just spray on rag and wipe it down..

    Gonna need a new scoop tho,, one i got is a bit small and i bent it  Undecided
    Logged
    Red
    Gold Member
    ****
    Offline Offline

    Location: Victoria
    Detector Used:
    Garrett Ace 250, ExcaliburII 1000,       OZ Scoop
    Posts: 524



    Awards
    « Reply #5 on: February 11, 2010, 18:52 »

    Hope you Etrac is out of warranty Clarrie, or the personal alterations may make it invalid.
    The md's designed for water hunting eg Excalibur's, PI's can be leathered and allows use of two hands if needed.  Where as, you have to be extremely careful not to get the controls wet!

    Now I've heard fishermen tell of the one that got away, but it must have been a coin embedded in something huge to bend a scoop! Smiley   There are some floating sifters on youtube mostly home made and I guess it depends on the type waters you are hunting as to whether they would be of real benefit to you. (...another thing to drag out of the car) 
    Cheers
    Logged
    Clarrie
    Bronze Member
    **
    Offline Offline

    Location: Geelong Vic
    Detector Used:
    GPX4500/Etrack
    Oldest find:
    approx 400 yo Chinese coin
    Posts: 20


  • Awards Awarded for finding a Penny

  • Awards
    « Reply #6 on: February 11, 2010, 19:16 »

    Gday Red

    I hope just wiping down the thing doesn't void warranty.. Thats all i have done atm, The beach where i am has a area that at low tide is about a foot deep, so i dont go very deep.I tie a rope on it up to my shoulders for the (woops factor)

     I am thinkin of waterproof one but  i dont think i need it with what i am doing.

    I have thought of the sifter , but as you said it's anotherthing to have in the car, so i can do without it. Smiley
    Logged
    Red
    Gold Member
    ****
    Offline Offline

    Location: Victoria
    Detector Used:
    Garrett Ace 250, ExcaliburII 1000,       OZ Scoop
    Posts: 524



    Awards
    « Reply #7 on: February 13, 2010, 15:51 »

    Clarrie, Do you also cover the control box for the whoopsie factor? Even a plastic bag is some protection. 
    I was just thinking, have you tried changing hands in using scoop and md?
     I'm naturally righthanded and would use a shovel with my right, but I tended to use my md in my right. It's actually easier for me to sweep with the left and scoop with the right. Better balanced and control.
    If your scoop isn't too bent and you are hunting the shallows, you may only need a bit of ajustment and practise.  Mine is 9"x5"diam. with a 29 1/2" handle. Fine for up to knee high wading and beach but if I get more adventurous I'd need a wet suit and longer scoop.

    Cheers
    Logged
    Clarrie
    Bronze Member
    **
    Offline Offline

    Location: Geelong Vic
    Detector Used:
    GPX4500/Etrack
    Oldest find:
    approx 400 yo Chinese coin
    Posts: 20


  • Awards Awarded for finding a Penny

  • Awards
    « Reply #8 on: February 13, 2010, 18:09 »

    I will try changing hands Red,, Never thought of that. When i first started gold prospecting i was swingin left handed , but i use my right now as it feels more natural for me..
    I have the stock box cover on and thats all. I dont use earphones , prefer to use speaker . Less for me to get tangled up in Smiley

    The scoop is a small one , it has bent backinto shape no probs, I am going to look at getting a bigger one , one of the OZ ones or one from Millsey's not too sure which yet. Going to Wedderburn in March and i will call in and have a look at his..
    Logged
    Pages: [1]
      Print  
     
    Jump to:  

    @MEMBER OF PROJECT HONEY POT
    Spam Harvester Protection Network
    provided by Unspam
    Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2008, Simple Machines LLC
    Theme based on DarkSilver Equinox by Lo0kBeHiNdU © 2008 | Sitemap
    Valid XHTML 1.0! Valid CSS!