* Share it Around


Author Topic:  Protecting O rings.  (Read 1069 times)

0 Members and 1 Guest are viewing this topic.

Offline Tasrog

  • Platinum
  • *****
  • Join Date: Mar 2012
  • Posts: 1754
  • SO MUCH GROUND....SO LITTLE TIME.

  • Fill this by Posting :)
    40%
    • I live in: Shearwater
  • Likes Given: 47

  • Total Badges: 33
    Badges: (View All)
    Fifth year Anniversary Returned an Item The Gold Ring 1000 Posts 500 Posts 100 Posts 50 Posts 10 Posts First Post Fourth year Anniversary Third year Anniversary Second year Anniversary
Protecting O rings.
« on: January 26, 2015, 22:47 »
Howdy
Found this clip on You Tube . Makes sense to me. Thoughts anyone?
#Invalid YouTube Link#
Roger
  • Detector(s) owned/used: used a ML 4500:Own - BH Tracker IV: AT PRO International, BH 3300, Fisher F5, GoFind 60, Excalibur 2
  • Oldest find: 1806 King George III penny
The bucket list. Gothic Florin - found, Gold ring - found, Trench Art - not found, Sunrise badge - not found, Cricket buckle = not found, Sov or half Sov - not found.

Offline goldnugget01

  • Platinum
  • *****
  • Join Date: Mar 2013
  • Posts: 1985

  • Fill this by Posting :)
    0%
    • I live in: Wide Bay Qld
  • Likes Given: 494

  • Total Badges: 22
    Badges: (View All)
    Fourth year Anniversary 1000 Posts 500 Posts 100 Posts 50 Posts 10 Posts First Post Third year Anniversary Second year Anniversary One year Anniversary
Re: Protecting O rings.
« Reply #1 on: January 27, 2015, 00:03 »
Its been pretty well reported about people having issues with the seals on some models.  ML doesn't recommend any lube but I don't know.  Even the slightest crimp will let water in so having an additional barrier as well as something that will help prevent crimping has to be a good thing in my opinion.
  • Detector(s) owned/used: ML Explorer SE - std DD coil & ML x-terra 70. Coils: std concentric, 10x5 18.75DD, 15" 18.75DD
  • Oldest find: 1912 threepence...make that an 1899 Penny..make that an 1861? German 4 Pfennige. A suss looking (but confirmed) 1830-1837 half crown
Every day is 'Clean Up Australia Day' when you go detecting.

Offline AngerManagement

  • Gold
  • ****
  • Join Date: Mar 2014
  • Posts: 728
  • Any day above ground is a good day.

  • Fill this by Posting :)
    50%
    • I live in: Brisbane
  • Likes Given: 1563

  • Total Badges: 20
    Badges: (View All)
    Third year Anniversary 500 Posts 100 Posts 50 Posts 10 Posts First Post Second year Anniversary One year Anniversary
Re: Protecting O rings.
« Reply #2 on: January 27, 2015, 10:33 »
I lube all my connections...  

Less is more... And  I mean it,less is more.

***  I use a non conductive Si based lube...Available at many Auto shops and Auto places = Bulb Grease.
For the Excal I get a little more cautious due to possible issues at depth.
*** I use a special medical instrument Si based Vacuum grease.   It is thick and rated for sealing when extreme pressure differences.. This is what use; when I service and lube the orings around the switches and end-caps on the Excal.

***  I do not or recommend Silastic for the end-caps etc  as as it cures the fumes can destroy and or cause problems with electronic components.

NOTE:  Manufactures etc will not recommend using a lube in many cases; and for good reason.

1:  Many over lube and that is an issue - Less is more
2:  Correct o-rings have an embedded lube
3:  Lube will attract dust and sand = small items that will scratch and breach the water proofing. ( CTX3030 Battery breach is a typical example of what happens, with even a few bits of sand.)


« Last Edit: January 27, 2015, 20:40 by AngerManagement »
So can I use braid and how tight should the drag be set  when Sand Fishing...

 

@MEMBER OF PROJECT HONEY POT
Spam Harvester Protection Network
provided by Unspam